O.S. FX glow engine advice

  • Topic Author
  • New Member
  • New Member
More
6 years 7 months ago #17735 by
O.S. FX glow engine advice was created by
A recently acquired model has a FX series motor fitted. I'm not sure but I think it's a 160?
Also there is a valve? Fitted on the side of the cowl which has pipes to the engines needle valve and into the fuel tank. I have no idea what the valve arrangement is for.
Many thanks
Simon O
Attachments:

Please Log in or Create an account to join the conversation.

More
6 years 7 months ago - 6 years 7 months ago #17736 by JonTappin
Replied by JonTappin on topic O.S. FX glow engine advice
It's a Dubro fuel filler Simon, you need the matching fitting for the end of your fuel pump line. When pushed in it allows flow to the tank and blocks flow to the engine.

I had one but have very recently given it to someone else who had the same issue, not sure if you would be able to get another one.

Link to a complete unit

wheelspinmodels.co.uk/i/90203/?gclid=Cjw...cl3F4khoC3p4QAvD_BwE
Last edit: 6 years 7 months ago by JonTappin.
The following user(s) said Thank You:

Please Log in or Create an account to join the conversation.

More
6 years 7 months ago - 6 years 7 months ago #17737 by Phil Ford
Replied by Phil Ford on topic O.S. FX glow engine advice
It is a QuikFil. I have a few and two are still in use. Using it means only two lines required to fill and drain. I may have a spare probe around somewhere your welcome to have. Spare probes are hard to get.

Note: Other brand's probes don't work with it.

That new acquisition? Katana by any chance?
Last edit: 6 years 7 months ago by Phil Ford.

Please Log in or Create an account to join the conversation.

  • Topic Author
  • New Member
  • New Member
More
6 years 7 months ago - 6 years 7 months ago #17739 by
Replied by on topic O.S. FX glow engine advice
Yes Phil, it's from Hugh Mathews estate. Does it look like a 160 to you? It's fitted with a 18x8 prop. The Katana is a CM model. Yes please to the fuel fitting. Thank you.
Last edit: 6 years 7 months ago by .

Please Log in or Create an account to join the conversation.

More
6 years 7 months ago #17740 by Phil Ford
Replied by Phil Ford on topic O.S. FX glow engine advice
Glad it has gone to a good home. !8x8 will be okay even an 18 x 10 if it has been broken in. Ringed version these are. Powerful for their size.

Please Log in or Create an account to join the conversation.

More
6 years 7 months ago #17743 by DaveBright
Replied by DaveBright on topic O.S. FX glow engine advice

Phil Ford wrote: Glad it has gone to a good home. !8x8 will be okay even an 18 x 10 if it has been broken in. Ringed version these are. Powerful for their size.

If yoda doesn’t have a filling probe I’m pretty sure I’ve got a spare somewhere

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.309 seconds

Latest Posts