Bucker Jungmeister re -engine

  • kevinross
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
3 years 5 months ago #24761 by kevinross
Bucker Jungmeister re -engine was created by kevinross
Ive replaced the Saito 33cc 3 cylinder with their 30cc single leaving a large gap and a loss of 200grms nose weight. The kit came with disgusting plastic moulding.

I had a 3D printed 9cylinder of the correct size so have cut into sections and rebuilt into a 7 segments to match the cowl.
Attachments:
The following user(s) said Thank You: 4Pedalsfly, Brian

Please Log in or Create an account to join the conversation.

  • kevinross
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
3 years 5 months ago #24762 by kevinross
Replied by kevinross on topic Bucker Jungmeister re -engine
continued

I used these ferrules to simulate the spark plugs and used some old audio cables to simulate the HT leads.
Attachments:
The following user(s) said Thank You: 4Pedalsfly, DavidTappin, Phil Ford, Brian

Please Log in or Create an account to join the conversation.

More
3 years 5 months ago #24764 by JRI
Replied by JRI on topic Bucker Jungmeister re -engine
Nicely done Kevin!

Please Log in or Create an account to join the conversation.

More
3 years 5 months ago #24765 by Phil Ford
Replied by Phil Ford on topic Bucker Jungmeister re -engine
Nice job Kevin. I had not thought of that - 3D printed cylinders! Could have done with some for my Pitts rather than a blank, black baffle. Oh well.

Please Log in or Create an account to join the conversation.

More
3 years 5 months ago #24768 by DaveBright
Replied by DaveBright on topic Bucker Jungmeister re -engine
Shame you had to give up on the Saito Kevin. They sound so good! Mine’s going well in the Sea Fury

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.376 seconds

Latest Posts