Joining stainless steel exhaust components

  • JRI
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
8 years 2 months ago #8088 by JRI
Joining stainless steel exhaust components was created by JRI
I am making a custom exhaust header for my Mig3 and 3W 55i using 25mm stainless components and flex header tube. What are the best materials and tools and techniques for soldering/brazing the parts and where is the best place to buy them from?

Please Log in or Create an account to join the conversation.

  • Visitor
  • Visitor
8 years 2 months ago - 8 years 2 months ago #8091 by
Replied by on topic Joining stainless steel exhaust components
You can use standard softsolder if you use Phosphoric Acid as a flux.

It is also easier than copper/brass because of the lower heat conductivity of stainless steel.
Last edit: 8 years 2 months ago by .

Please Log in or Create an account to join the conversation.

More
8 years 2 months ago #8094 by Phil Ford
Replied by Phil Ford on topic Joining stainless steel exhaust components

ronp849 wrote: You can use standard softsolder if you use Phosphoric Acid as a flux.


Where would one get the acid from? I have needed to weld stainlessitems before and have had to take it a specialist welding shop

Please Log in or Create an account to join the conversation.

More
8 years 2 months ago #8097 by DavidTappin
Replied by DavidTappin on topic Joining stainless steel exhaust components
Ron wrote "You can use standard softsolder", I tried soft solder in a similar situation years ago, it lasted about 30 seconds until the heat of the exhaust turned it extra soft, even actual runny!

How about silver solder?

Please Log in or Create an account to join the conversation.

  • Visitor
  • Visitor
8 years 2 months ago #8098 by
Replied by on topic Joining stainless steel exhaust components
Now I have read the original post properly, I can see that soft solder would not be suitable!!!

It seems like Phosphoric acid can be used with silver solder as well but I have not personally tried it.

www.bssa.org.uk/topics.php?article=150

Please Log in or Create an account to join the conversation.

More
8 years 2 months ago #8151 by kevinross
Replied by kevinross on topic Joining stainless steel exhaust components
Ive dome a lot of SS exhaust work and always use this flux - it does what is says on the label



I recommend this company for your Silver Solder

www.cupalloys.co.uk/medium-temp-silver-solder/index.asp

I have an Oxy / Mapp gas facilities if you want me to solder it for you.
Attachments:
The following user(s) said Thank You: JRI

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.405 seconds

Latest Posts