Concrete advice

  • MikeSeale
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 11 hours ago #23870 by MikeSeale
Concrete advice was created by MikeSeale
Completely not model related...looking for advice from anyone who might be able to help...

I've got a couple of statues for my garden that need to have bases formed in the flower beds. The statues are 1.5m tall and weight 140kg each (yes, that's not a typo - they are 22 stone each). The base is 360mm square. Does anyone know how deep and wide a concrete base should be?

Please Log in or Create an account to join the conversation.

More
4 years 10 hours ago #23874 by JonTappin
Replied by JonTappin on topic Concrete advice
Sounds like one for Mr Dean!

Please Log in or Create an account to join the conversation.

More
4 years 8 hours ago #23877 by simondean
Replied by simondean on topic Concrete advice
Hi Mike
I’d make concrete base 600mm square and have a depth of 150 mm concrete just to be on the safe side
If ground is ok underneath this depth it’ll be ok but if ground is poor put 100mm of base material ie crushed concrete or scalpings then compact before laying concrete.
Make sure you level and leave smooth or your statues won’t sit right

Please Log in or Create an account to join the conversation.

More
4 years 8 hours ago #23878 by kevinross
Replied by kevinross on topic Concrete advice
Would one of these would help ? (couldn't resist - sorry)
Attachments:

Please Log in or Create an account to join the conversation.

More
3 years 11 months ago - 3 years 11 months ago #23884 by DaveBright
Replied by DaveBright on topic Concrete advice
Always good to get a concrete answer :-)
Last edit: 3 years 11 months ago by DaveBright.

Please Log in or Create an account to join the conversation.

  • MikeSeale
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
3 years 11 months ago #23885 by MikeSeale
Replied by MikeSeale on topic Concrete advice
Thanks, Simon. I'll follow your advice.

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.284 seconds