Winter build threads

More
8 years 3 months ago #10461 by Brian
Replied by Brian on topic Winter build threads
Hi Pete, here's a couple of shaky pics of the Giles' engine mounting box. The pencil lines are square to the centre line of the fuselage..
Regards.
Brian
Attachments:

Please Log in or Create an account to join the conversation.

More
8 years 3 months ago #10462 by JonTappin
Replied by JonTappin on topic Winter build threads
Hi Brian

The side thrust is built into the front bulkhead, which is common practice. You need to calculate or measure how much off centre the prop driver is horizontally and vertically, then off set the holes in the bulkhead for the mounting bolts by the same dimension. As long as the bulkhead is wide enough to allow for this then this will resolve your issue.

See my rubbish sketch below, I have exagerated the side thrust to try to make it clearer. Hope this helps
Attachments:
The following user(s) said Thank You: Brian

Please Log in or Create an account to join the conversation.

More
8 years 3 months ago #10465 by MikeSeale
Replied by MikeSeale on topic Winter build threads
What CAD package did you use, Jon?

Please Log in or Create an account to join the conversation.

More
8 years 3 months ago #10468 by DavidTappin
Replied by DavidTappin on topic Winter build threads
Complete Amateur Drafting package?

Please Log in or Create an account to join the conversation.

More
8 years 3 months ago #10471 by JonTappin
Replied by JonTappin on topic Winter build threads
Etch a sketch 2016 :)

Please Log in or Create an account to join the conversation.

More
8 years 3 months ago #10472 by Phil Ford
Replied by Phil Ford on topic Winter build threads

JonTappin wrote: Etch a sketch 2016 :)


Is that the one where you shake it and the sketch disappears? :lol:

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.318 seconds

Latest Posts