JR DSX 9 Antenna

  • Phil Ford
  • Topic Author
  • Offline
  • Administrator
  • Administrator
More
10 years 4 months ago #754 by Phil Ford
JR DSX 9 Antenna was created by Phil Ford
Broke the pin on the antenna. Got it taped up at present. :(
Hardly any model shops keep these! Hobbyplastic sell them but for £16.95 plus P&P. Wow! But Hobbyplastic want me to register, what a pulaver Can't really be arsed unless no other option

Please Log in or Create an account to join the conversation.

More
10 years 4 months ago #758 by JRI
Replied by JRI on topic JR DSX 9 Antenna
I taped up the antenna on my tx earlier this year - it cost me an expensive model!
I think it was due to the thin end of the antenna pointing directly towards the model (i.e minimum signal), or possibly unseen damage in the co-ax caused by the flopping antenna.
Don't risk it!

Please Log in or Create an account to join the conversation.

  • Phil Ford
  • Topic Author
  • Offline
  • Administrator
  • Administrator
More
10 years 4 months ago #759 by Phil Ford
Replied by Phil Ford on topic JR DSX 9 Antenna
Thanks for your input John. I will buy a new TX then.. :P

I will swallow hard and buy new antenna from Hobbyplastic

Please Log in or Create an account to join the conversation.

More
10 years 4 months ago #760 by kevinross
Replied by kevinross on topic JR DSX 9 Antenna
You could try

www.modelradioworkshop.co.uk/contact

Please Log in or Create an account to join the conversation.

More
10 years 4 months ago #762 by JonTappin
Replied by JonTappin on topic JR DSX 9 Antenna
I would just pay the money Phil, not worth risking a model for.

Hobbyplastic is the retail arm of MacGregor, so at least you know it is the genuine replacement part.

Please Log in or Create an account to join the conversation.

  • Phil Ford
  • Topic Author
  • Offline
  • Administrator
  • Administrator
More
10 years 4 months ago #763 by Phil Ford
Replied by Phil Ford on topic JR DSX 9 Antenna
Ah! Thanks Jon. I was a bit concerned it was not genuine part

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.533 seconds

Latest Posts