Grub screw removal

  • ruggerbloke
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
4 years 4 months ago #23898 by ruggerbloke
Replied by ruggerbloke on topic Grub screw removal
Thanks again Kevin. I'll have another look this morning in the cold light of day and consider all options. This forum is invaluable for help from so many experienced modellers/engineers. Thank you all.

Please Log in or Create an account to join the conversation.

More
4 years 4 months ago #23904 by Chris73
Replied by Chris73 on topic Grub screw removal
A safer option than a blow torch is to use a soldering iron, just hold the tip of the iron on the grub screw, that way you are only heating the bit that you want heat on

Please Log in or Create an account to join the conversation.

More
4 years 4 months ago #23905 by DaveBright
Replied by DaveBright on topic Grub screw removal

Chris Hughes wrote: A safer option than a blow torch is to use a soldering iron, just hold the tip of the iron on the grub screw, that way you are only heating the bit that you want heat on


This is how I soften loctite too.... blue and occasionally the red stuff if used in error :-)

Please Log in or Create an account to join the conversation.

  • ruggerbloke
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
4 years 4 months ago #23906 by ruggerbloke
Replied by ruggerbloke on topic Grub screw removal
Thanks to everyone that took the time to reply. It's nice to know that everyone, regardless of experience has come up against this type of problem in the past. Cheers all.

Please Log in or Create an account to join the conversation.

More
4 years 4 months ago #23907 by JRI
Replied by JRI on topic Grub screw removal
A popular method seems to be to use a tungsten carbide drill into the remaining head of the grub screw, then gently hammer in a torx screwdriver bit, apply heat to the bit using a soldering iron, then attach the screwdriver body and it should remove easily.

Please Log in or Create an account to join the conversation.

  • ruggerbloke
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
4 years 4 months ago #23908 by ruggerbloke
Replied by ruggerbloke on topic Grub screw removal
Thanks all. I have now managed to find a front fixing prop driver that fits. All tested and the propshaft luckily is not bent to no need to remove grubscrews now. Result! Thanks for all your input.

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.277 seconds

Latest Posts

  • No posts to display.