Rubin

  • MikeSeale
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 8 months ago #21957 by MikeSeale
Replied by MikeSeale on topic Rubin
BTW, I placed an order with Model Shop Leeds yesterday afternoon and it was delivered this morning.

Please Log in or Create an account to join the conversation.

  • MikeSeale
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 8 months ago #21958 by MikeSeale
Replied by MikeSeale on topic Rubin
Sub-fin added and sanded to shape
Attachments:

Please Log in or Create an account to join the conversation.

  • MikeSeale
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 8 months ago #21959 by MikeSeale
Replied by MikeSeale on topic Rubin
Wings cut. Retract plate added.Another plate is added to the top of the wing and 5mm dowels tie both surfaces together so that landing loads are spread through the whole wing...hopefully!
Attachments:

Please Log in or Create an account to join the conversation.

  • MikeSeale
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 8 months ago #21960 by MikeSeale
Replied by MikeSeale on topic Rubin
Wing skins made from six sheets of 4" balsa and 1 sheet of 3". This is for just one half, so a total of 12 x 4" and 2 x 3" sheets in total...it's a big wing!
Attachments:
The following user(s) said Thank You: 4Pedalsfly

Please Log in or Create an account to join the conversation.

More
4 years 8 months ago #21961 by Phil Ford
Replied by Phil Ford on topic Rubin
What are you using to join the sheets? Excellent progress Mike but you will have nothing left to do by Easter Weekend and then what? :lol:

Please Log in or Create an account to join the conversation.

  • MikeSeale
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 8 months ago #21962 by MikeSeale
Replied by MikeSeale on topic Rubin
Tape sheets together with masking tape. Turn over and use the tape as a hinge to open the joint. Aliphatic glue then pinned flat for a couple of hours. Unpin and remove tape sooner rather than later. Leave it too long and the tape sometimes stays stuck to the joint.

The good side is the taped side.
The following user(s) said Thank You: Phil Ford

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 1.369 seconds

Latest Posts