Removing solar film

  • Topic Author
  • Visitor
  • Visitor
6 years 5 months ago #17389 by
Removing solar film was created by
Hi

Any tips on a quick way to remove solar film from a balsa model.

I am revamping my super air

Any help appreciated

Simon:) :)

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago - 6 years 5 months ago #17390 by JRI
Replied by JRI on topic Removing solar film
If it's an original super air then it won't be solarfilm - it will be chinafilm and will come off very easily with a little bit of heat from a hot air gun (for model film) or a hair drier or a clothes iron. Cellulose thinners will take of any remaining colur or glue.
Last edit: 6 years 5 months ago by JRI.
The following user(s) said Thank You:

Please Log in or Create an account to join the conversation.

  • Topic Author
  • Visitor
  • Visitor
6 years 5 months ago #17391 by
Replied by on topic Removing solar film
It has been recovered , but I will persist with the heat gun

Ta

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #17392 by JonTappin
Replied by JonTappin on topic Removing solar film
Simon

Another method you could try is using sticky tape on any remaining patches, before using thinners. Rub it down well onto the areas where film is left, then tear off. It sometimes works well and sometimes doesn't, but worth a try
The following user(s) said Thank You:

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.267 seconds

Latest Posts