Quanum Observer Rebuild

  • Phil Ford
  • Topic Author
  • Offline
  • Moderator
  • Moderator
More
21 Dec 2018 17:16 #18475 by Phil Ford
Replied by Phil Ford on topic Quanum Observer Rebuild
Chris doesn't think so ;) .

Any way I have modified the floor (again) and I have a cunning plan that may just work this time round. :unsure:

Please Log in or Create an account to join the conversation.

  • Brian
  • New Member
  • New Member
More
21 Dec 2018 17:50 #18476 by Brian
Replied by Brian on topic Quanum Observer Rebuild
Does your "cunning plan" involve a turnip Baldrick, or am I in the wrong era?

Please Log in or Create an account to join the conversation.

  • Phil Ford
  • Topic Author
  • Offline
  • Moderator
  • Moderator
More
24 Dec 2018 11:05 #18485 by Phil Ford
Replied by Phil Ford on topic Quanum Observer Rebuild
It does not involve a turnip my Lord. If I could've found a turnip large enough maybe I could carve it to shape.
Instead I modified the floor a bit more., and stuck on the ex MX2 heat reshaped canopy. Trimmed the excess off after the glue had set. It is now secured by a hook at the front and double magnets at rear. I will repaint the green bit to grey to blend in. The blue canopy lights up just give it some authority!!:lol:

I can now move on to refitting the internal stuff, receiver, upgrading the position lights and tidy up the wiring.

Now my next job (by order) is helping to prepare the vegetables for the BIG day with a house full of guests to feed.
The following user(s) said Thank You: Brian

Please Log in or Create an account to join the conversation.

  • Brian
  • New Member
  • New Member
More
24 Dec 2018 12:57 #18486 by Brian
Replied by Brian on topic Quanum Observer Rebuild
Looks good Phil, at least you won't leave that canopy in the weeds, not with the fixings you mentioned.

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.266 seconds