The Thingy

struggling to find a slower kv motor that doesn't cost a fortune.... this is the best I can find,

3000kv run a 4.75x4.75 on it. that will give same performance as might but expect batteries to get a bit toasty if you fly it flat out for 4mins!

www.hobbyking.co.uk/hobbyking/store/uh_v....asp?idProduct=28723

Mike also mentioned that there were a couple of dimensions that were not on the drawings have updated, one was the fin, I think other was the slope on the back of the fuz sides? Have added both.

pondering a slightly different method of making the fuz too.

first 1min 50secs of the video, making it out of one piece rather than 5, should make it stronger.

They mount the motor mount differently, but their power system is a lot smaller than the one for the thingy.

Have updated the google document with links to the drawings so you dont need to sign up to onshape any more.

this includes the one piece folding fuz as per the video above

docs.google.com/document/d/1HMuf1KFhNXNU...2jE/edit?usp=sharing