What control box for landing lights

  • Topic Author
  • Visitor
  • Visitor
6 years 6 days ago #16410 by
Replied by on topic What control box for landing lights
Similar Phil but no bananas in the box

Please Log in or Create an account to join the conversation.

More
6 years 6 days ago - 6 years 6 days ago #16412 by 4Pedalsfly
Replied by 4Pedalsfly on topic What control box for landing lights
Simon - Model Radio Workshop - Southampton offer a range of switching devices, their "Standard Relay Switch" would do
the job at £18.0, which is more expensive than the HK job but is in stock.

My HK - FW190 has lights but these are permanently on.

Look forward to you "flashing " us as you pass serenely by.

Colin.
Last edit: 6 years 6 days ago by 4Pedalsfly.
The following user(s) said Thank You:

Please Log in or Create an account to join the conversation.

More
6 years 5 days ago - 6 years 5 days ago #16413 by Phil Ford
Replied by Phil Ford on topic What control box for landing lights
If it is the model depicted in the video then I think the lights are permanently on which means they probably plug into a Y-lead from spare channel on RX. As you say there minimal info on plugging in and setting up.

In the video it is defined as "Super Scale"! What? 40 size at most. ;)
Last edit: 6 years 5 days ago by Phil Ford.
The following user(s) said Thank You:

Please Log in or Create an account to join the conversation.

  • Topic Author
  • Visitor
  • Visitor
6 years 5 days ago #16416 by
Replied by on topic What control box for landing lights
Phil, In China 40 is SUPERSIZE! Quite small people in China you know.
Anyway called in at Sussex models today, they sold me a bunch of cables with the correct female ends so that I can plug up all the lights, combine the red wires and black wires to a HD servo lead and plug them in for a hopefully fantastic light show. We will see!

Please Log in or Create an account to join the conversation.

More
6 years 5 days ago #16417 by Phil Ford
Replied by Phil Ford on topic What control box for landing lights
I was on the right lines then. LEDs have internal resistors so will run off BEC output/spare Rx channel. Good stuff!:)

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.316 seconds

Latest Posts