× Hardware, Accessories and Avionics

Epoxy Glass Sheet

More
13 Mar 2019 18:23 #19056 by Dave Rogers
Replied by Dave Rogers on topic Epoxy Glass Sheet
Phil use cling film on the tube
The following user(s) said Thank You: Phillip Ford, John Bannister

Please Log in or Create an account to join the conversation.

  • Phillip Ford
  • Phillip Ford's Avatar Topic Author
  • Offline
  • Administrator
  • Administrator
More
13 Mar 2019 19:24 #19057 by Phillip Ford
Replied by Phillip Ford on topic Epoxy Glass Sheet

Dave Rogers wrote: Phil use cling film on the tube


Not me Dave, it is John B. But thanks anyway. Did it work for you?

Please Log in or Create an account to join the conversation.

More
13 Mar 2019 19:53 #19059 by Dave Bright
Replied by Dave Bright on topic Epoxy Glass Sheet
It does work. I used cling film over blue foam to make the carbon retract blisters for my venom wing.
The following user(s) said Thank You: Phillip Ford

Please Log in or Create an account to join the conversation.

More
14 Mar 2019 08:41 #19062 by Mike Seale
Replied by Mike Seale on topic Epoxy Glass Sheet
An alternative to using cling film is baking paper. I made glass tubes for my Orcrist by wrapping baking paper around the carbon wing joiner. After wrapping it with glass I put heat shrink over the mess and once cured the tube came off the rod easily and the surface finish was smooth after the hear shrink was removed.
The following user(s) said Thank You: Phillip Ford, John Bannister

Please Log in or Create an account to join the conversation.

Moderators: Mike SealeDave Bright
Time to create page: 0.200 seconds