DSX9 Roller

I know it is 9 years old so expected. My DSX9 roller selector is losing it's springy feel making it fiddly to select menus/models. Can it be bought as a spare part or send it in somewhere for repair? In the meantime I am going to copy all the model settings across on to my DSX11 just in case. A bit of a pain as I will have to rebind a lot of models.

this is your man

Mike Ridley
Model Radio Workshop
12 Quilter Close
Sholing
Southampton
Hampshire
SO19 0DW
07708 436163‬

Mike has got back to me very quickly. The rotary switch and tactile switch can be replaced but if the roller is damaged then it will be a problem. I personally don't think the roller is duff. Today I had to be very very light on the Roller to change models or settings because the spring is virtually lifeless, the latter I believe is the Tactile switch. Of course no-one knows till Mike checks it out. Possibly drop it in next week. In the meantime I will copy all my models over to the DSX11 just in case.

* One of his customers had sourced a Spektrum roller which had to be "modified" to fit. What ever that entails!

Phil Ford wrote: Mike has got back to me very quickly.

* One of his customers had sourced a Spektrum roller which had to be "modified" to fit. What ever that entails!

If the modified roller turns out to be your only option, i'm sure that chap in BoS could assist !

Phil. I had the same issue with my sons DX9. I brought a complete roller on a pcb board from Horizon Hobby. Very easy to change yourself and not expensive.

Hi Alan, do you have part number please and where was it sourced