Excellent small drill selection

  • kevinross
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 11 months ago #19588 by kevinross
Replied by kevinross on topic Excellent small drill selection
No i don't need them - Ive got mm. fraction, Number and letter drills of pretty much every combination EXCEPT no left hand helix so maybe i should add these to my collection. (no i didn't read the detail)

However talking to some new members, they don't have any drills as evidenced when assembling ARTF's so a means of gradually opening servo arm holes without spending fortune might be useful.

Please Log in or Create an account to join the conversation.

More
4 years 11 months ago #19589 by Chris73
Replied by Chris73 on topic Excellent small drill selection
Only tool you need, if it still doesnt fit you just need a bigger one :silly:

Attachments:

Please Log in or Create an account to join the conversation.

More
4 years 11 months ago #19590 by JonTappin
Replied by JonTappin on topic Excellent small drill selection
That's the same tool I use when I'm calling for Mitch at an IMAC comp

Please Log in or Create an account to join the conversation.

  • kevinross
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 11 months ago - 4 years 11 months ago #19593 by kevinross
Replied by kevinross on topic Excellent small drill selection
Called in at my local Aldi to stock up with left hand drills but the shelf was bare - an assistant said they all sold very quickly ( or were they recalled as faulty ! )
Last edit: 4 years 11 months ago by kevinross.

Please Log in or Create an account to join the conversation.

More
4 years 11 months ago - 4 years 11 months ago #19594 by 4Pedalsfly
Replied by 4Pedalsfly on topic Excellent small drill selection
Enjoyed reading the drill saga - left spiral drills are for drilling holes to be tapped with left hand threads.
Friday, while following Mrs. A around "The Range " shop - spotted a set of very small right hand spiral drills at around £5.00,
from memory there were about 10 - with the largest 1.5 mm.
Next time we are at that shop I'll get more details.
Did not purchase since like Kevin I'm well stocked with drills.
Colin.A
Last edit: 4 years 11 months ago by 4Pedalsfly.

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.297 seconds

Latest Posts