Bucker Jungmeister repair

kevinross
Topic Author
Offline
Platinum Member

3 years 2 months ago #25026 by kevinross

Replied by kevinross on topic Bucker Jungmeister repair

After reassembly, used the crank protractor to verify the valve opening and closing was sensible (saito dont publish data) then used this RCxel ignition timing kit the verify the ignition timing.The LED extinguishes on the sensor trailing edge at 31deg BTDC.

Attachments:

The following user(s) said Thank You: 4Pedalsfly, Phil Ford

Please Log in or Create an account to join the conversation.

kevinross
Topic Author
Offline
Platinum Member

3 years 2 months ago - 3 years 2 months ago #25027 by kevinross

Replied by kevinross on topic Bucker Jungmeister repair

Test run the engine today and for the first time in its life this inlet valve mechanism is getting lubrication so i hope it proves good in operation.

Q - why do i have to modify what is reputed to be one of the best Japanese engines to provide the basic requirement - lubrication.

Attachments: