Help required OS 70 - 4 Stoke (Acro WOT)

Good to hear that the rogue engine is sorted now. Don't contact the seller, go direct to the eBay complaints site, they'll sort him out, you might even get a refund..................I did!
Nice one Phil!

oh really , thats good to know, might try it. defo not sold as advertised

Well here is an update !

I contacted seller ! SHOCK :ohmy: no reply. listed all faults from phil's list.

Contacted eBay, guess what, not covered, as it was cash on collection, they advised me to call police as they would deal with it ! bit harsh I thought, Airframe was ok, Ive upload the conversation to eBay in pic

Note to self = careful on eBay sales, shame as I've had some real good begins on there !

Lee - Difficult to understand E-Bays attitude.
Best option may be to call round to the guy with a few of your army buddies
in mufti - this may well get a result.
Maybe a telephone call will do the trick, if not revert to action one.
Best of luck.
Colin

G_O_L_D wrote: Note to self = careful on eBay sales, shame as I've had some real good begins on there !

I generally take the attitude that if it is being sold on Ebay it's probably not even decent enough to sell on BMFA classifieds, where at least there are real RC flyers. I found this too a few years ago when purchasing a Carl Goldberg Chipmunk from Ebay. Looked good in the pictures at least. Lesson learnt!

Here you go Lee, running happily. A couple of minutes of playing and then dive back indoors. That's my bit done!

Two degrees and a breezy easterly - feels like -2 deg. I'm staying in for the rest of the day. Brrr.

Nice one Phil

PhilF51 wrote: Here you go Lee, running happily. A couple of minutes of playing and then dive back indoors. That's my bit done!

Two degrees and a breezy easterly - feels like -2 deg. I'm staying in for the rest of the day. Brrr.

Phil ur a diamond ! ty so much hopefully the COWL will do on with new engine, if not easy to get or tinker with

Theoretically, as the cowl has previously been cut for the mixture screw to be upwards, the norm in my opinion the cowl will fit nicely. Why anybody would want to have to kneel down and reach under the cowl and near a spinning prop to adjust the screw is anybody's guess. The only thing you may have to do is the adjust the angle of the exhaust header (manifold in English GB ).

On my Wots Wot the cowl comes off with out having to remove any items, it just clears everything. You won't know till you refit the cowl though.

PhilF51 wrote: ...On my Wots Wot the cowl comes off with out having to remove any items, it just clears everything...

Blimey Phil, what size of prop and spinner are you using on your Wots Wot?