Retro jet

  • flyingpete
  • Topic Author
  • Offline
  • Banned
  • Banned
More
6 years 6 months ago #14294 by flyingpete
Replied by flyingpete on topic Retro jet
Next is front underside ply sheet, rear fuzz balsa stiffners, 12mm ply wing bolt mount and 12mm ply u/c mount
Attachments:

Please Log in or Create an account to join the conversation.

  • flyingpete
  • Topic Author
  • Offline
  • Banned
  • Banned
More
6 years 6 months ago #14295 by flyingpete
Replied by flyingpete on topic Retro jet
Rear balsa l fuzz balsa sheeting glued and trial fitment of the two tanks
Attachments:

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #14296 by DavidTappin
Replied by DavidTappin on topic Retro jet
Pity I'll be away next Saturday Pete, looks as if I'll probably be missing the maiden flight!

Please Log in or Create an account to join the conversation.

  • flyingpete
  • Topic Author
  • Offline
  • Banned
  • Banned
More
6 years 6 months ago - 6 years 6 months ago #14297 by flyingpete
Replied by flyingpete on topic Retro jet
Next job is glue in the turbine rails supports and hardwood rails. Front hatch supports and sheeting added and sanded to shape
Attachments:
Last edit: 6 years 6 months ago by flyingpete. Reason: Pics
The following user(s) said Thank You: Brian

Please Log in or Create an account to join the conversation.

  • flyingpete
  • Topic Author
  • Offline
  • Banned
  • Banned
More
6 years 6 months ago #14298 by flyingpete
Replied by flyingpete on topic Retro jet
Mark out the front hatch and cut out. Fit rudder servo rails
Attachments:

Please Log in or Create an account to join the conversation.

  • flyingpete
  • Topic Author
  • Offline
  • Banned
  • Banned
More
6 years 6 months ago #14299 by flyingpete
Replied by flyingpete on topic Retro jet
Nose leg support made and fitted, battery tray fitted in the nose and nose cone ready to be trimmed and fitted.Thats the fuzz finished so onto the wings.
Attachments:

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.317 seconds

Latest Posts