Mini LecRoo

This model appeared in RC "Model World" as a free plan feature and being of balsa & ply construction
appealed to me. With the onset of the colder weather I decided it was time to get back into some traditional building
using up some of my stock of 1/4 in balsa sheet. Why did I buy that years ago ?
It is a simple build and when finished should provide some exciting delta flying, power to rate ratio should be in the region
of 200 Watts per pound. Being a tractor delta it can be easily hand launced without any danger of damaged fingers.

If anyone else is interested in building one I can get a 2 page set of A1 sized plans printed for £4.40 at Xercad in Ferndown and
also supply an electronic copy of build review.

Pics show model start of build thread.

Colin.A

More pictures - I used "Deluxe Materials" Aliphatic Resin for gluing the 1/4 in balsa sheets together, these being
pinned and weighted and left overnight to fully dry.

This Deluxe Materials glue is my preferred one for balsa to balsa joints.

Colin.

Progress continues at a slow pace.
See 2 pics attached.
Colin.

4Pedalsfly wrote: Progress continues at a slow pace.
See 2 pics attached.
Colin.

Maybe slow, but looking at the plan I'd say you've nearly finished now that you have three parts made.

MikeSeale wrote:

4Pedalsfly wrote: Progress continues at a slow pace.
See 2 pics attached.
Colin.

Maybe slow, but looking at the plan I'd say you've nearly finished now that you have three parts made.

:lol: Just needs a little Lipo and ready to go?

Fuselage sides & formers fabricated - fuselage assembly begins.
1 pic attached.
Colin.