Rebuild Thread - EF 104 Extra

More
8 years 2 months ago #8081 by Phil Ford
Replied by Phil Ford on topic Rebuild Thread - EF 104 Extra
You have certainly done some time consuming work. I believe you need to have certain mind set before you start a major fiddle-ass job. so easy to say "can't be arsed". Well done Jon.
The following user(s) said Thank You: JonTappin

Please Log in or Create an account to join the conversation.

  • JonTappin
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
8 years 2 months ago #8082 by JonTappin
Replied by JonTappin on topic Rebuild Thread - EF 104 Extra
Finally, I added lots of balsa triangular stock to reinforce.

Just need to fuel proof and this is now finished, next job is to strip the bottom covering off and check that all if the other joints are secure and to add glue or reinforcement as necessary, then on to the wings.

I will try to keep updating as I go from now on.
Attachments:

Please Log in or Create an account to join the conversation.

  • JonTappin
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
8 years 2 months ago #8083 by JonTappin
Replied by JonTappin on topic Rebuild Thread - EF 104 Extra

PhilF51 wrote: You have certainly done some time consuming work. I believe you need to have certain mind set before you start a major fiddle-ass job. so easy to say "can't be arsed". Well done Jon.


Thanks Phil

To be honest, it has given me something to do on these terrible wet and windy weekends!!

Please Log in or Create an account to join the conversation.

More
8 years 2 months ago #8100 by Dave Rogers
Replied by Dave Rogers on topic Rebuild Thread - EF 104 Extra
Great job! Well impressed!

Please Log in or Create an account to join the conversation.

More
8 years 2 months ago #8130 by flyingpete
Replied by flyingpete on topic Rebuild Thread - EF 104 Extra
Top job B) it's always a nice feeling after you bent it, to see it coming back to life for more punishment.

Please Log in or Create an account to join the conversation.

More
8 years 1 month ago #8193 by AlanF
Replied by AlanF on topic Rebuild Thread - EF 104 Extra
Nice work Jon. Do you think that drawing up new formers in CAD and getting parts CNC cut would have been a reasonable alternative to hand cutting? We must have some CAD experts in the club.

What's your plan for the wing repairs? I'm guessing that the wing tube damage extends to all the associated internal ribs.

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.271 seconds

Latest Posts