Carb rebuild kits

More
6 years 1 month ago #19165 by kevinross
Replied by kevinross on topic Carb rebuild kits
In case you dont have this detail

www.walbro.com/tech-tips/metering-lever-setting/
The following user(s) said Thank You: AlanF

Please Log in or Create an account to join the conversation.

  • AlanF
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
6 years 1 month ago #19167 by AlanF
Replied by AlanF on topic Carb rebuild kits
Thanks Kevin, I think it's set too low at the moment so if I get lean running after the rebuild I'll reset it.

Please Log in or Create an account to join the conversation.

More
6 years 1 month ago #19169 by kevinross
Replied by kevinross on topic Carb rebuild kits
Floppy flaps on the pump section normaly settle when the engine is running. If the needle lever is not set correctly - that could be the problem. - I would adjust to the manual before proceeding.

Please Log in or Create an account to join the conversation.

More
6 years 1 month ago #19170 by DaveBright
Replied by DaveBright on topic Carb rebuild kits
Was a day of floppy flaps at ththe field today!!

Please Log in or Create an account to join the conversation.

  • AlanF
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
6 years 1 month ago #19172 by AlanF
Replied by AlanF on topic Carb rebuild kits

davidbright wrote: Was a day of floppy flaps at ththe field today!!


Well you can't leave that there Dave, the story must be told.

Please Log in or Create an account to join the conversation.

More
6 years 1 month ago - 6 years 1 month ago #19173 by kevinross
Replied by kevinross on topic Carb rebuild kits

davidbright wrote: Was a day of floppy flaps at ththe field today!!


I hope not the sort of flops as happened on Wed
Attachments:
Last edit: 6 years 1 month ago by kevinross.

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.266 seconds

Latest Posts