Advice gas turbine

More
4 years 10 months ago #21689 by JonTappin
Replied by JonTappin on topic Advice gas turbine
I think you've got a bargain there with that little time on the turbine!

Please Log in or Create an account to join the conversation.

  • Wingman1962
  • Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 10 months ago #21690 by Wingman1962
Replied by Wingman1962 on topic Advice gas turbine
Yes I think so Jon, got it for 950 in the end, still got to collect from kent so some expense there.

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #21692 by JRI
Replied by JRI on topic Advice gas turbine
My Jetcat P80 has > 50 hours on the clock and still going strong. If its a kerostart conversion you have, you may occassionaly need to de-crud the ceramic glow plug in kerosene in an ultrasound cleaner (you a welcome to use mine). This gives you a very reliable startup - so long as you have a good (high 'C' rating) battery pack of around 3000mA.

Please Log in or Create an account to join the conversation.

  • Wingman1962
  • Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 10 months ago #21693 by Wingman1962
Replied by Wingman1962 on topic Advice gas turbine
Ok thanks, I'm new to gas turbines so I will take that onboard. It comes with the batteries so hopefully they will be adequate.

Please Log in or Create an account to join the conversation.

  • Wingman1962
  • Topic Author
  • Offline
  • New Member
  • New Member
More
4 years 9 months ago #21754 by Wingman1962
Replied by Wingman1962 on topic Advice gas turbine
Hi Jon. Got the Turbinator home and have been reading up on settings and procedures. Got a question tho, the previous owner ran the turbine on Jet A1 fuel, should I continue to use that and where can I get it.
Thanks John

Please Log in or Create an account to join the conversation.

More
4 years 9 months ago - 4 years 9 months ago #21755 by JonTappin
Replied by JonTappin on topic Advice gas turbine
Most of us run kerosene, you'll be fine with that. I get mine from

Red Eagle Fuels, 5 Willis Way, Poole BH15 3SS

You'll just need to order some turbine oil, you can get it from Motors and Rotors and other places
Last edit: 4 years 9 months ago by JonTappin.
The following user(s) said Thank You: Wingman1962

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.584 seconds

Latest Posts