Phil's Phase 6 Build

Great stuff phil, if only I can get the enthusiasm to tart mine up?

You could do Dave when you got a few hours to spare as it is only polyester covered (hopefully) because if it is covered in Monocoat you got trouble. It flies well so leave it alone.:lol:

Well done Phil - Look forward to seeing video of the maiden flight - this weekend ?
Colin.

Possibly. Likely

Brilliant work Phil

Hope there's nothing significant about the Phase 6 being in front of the big bin in the last photo.
Hope the maiden goes well.

Brian wrote: Hope the maiden goes well.

It didn't! Wind was nowhere as forecast. Another day maybe in the forthcoming week.

Thanks go to Mike on the servo cover tip.

Following on from Mike's tips on Saturday I have replaced the control snakes with 1.5mm piano wire. Soldered 2mm adaptors on to the horn ends and Z bends at servo arm. Managed to slide a brace along the snake outers down inside the depths of the fuselage (a job I should've done before gluing on the bottom fuselage floor) to stop any flex.

Also for the future "hoolies" built in a ballast box.

Waiting now for a good wind at a decent slope!