Rubin

More
4 years 2 weeks ago #21950 by Phil Ford
Replied by Phil Ford on topic Rubin
I had always soaked the whole piece both sides first. Maybe this was not necessary after all.

Please Log in or Create an account to join the conversation.

  • MikeSeale
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 2 weeks ago #21951 by MikeSeale
Replied by MikeSeale on topic Rubin
I'm not bending it to such a tight radius as you have done on your u/c fairings. And the balsa I have is balsa cabin soft/light grade which absorbs water very quickly.
The following user(s) said Thank You: Phil Ford

Please Log in or Create an account to join the conversation.

More
4 years 2 weeks ago #21952 by Phil Ford
Replied by Phil Ford on topic Rubin

MikeSeale wrote: IAnd the balsa I have is balsa cabin soft/light grade which absorbs water very quickly.

All my balsa sheet is medium grade so that may account for easy splits if not soaked.

Please Log in or Create an account to join the conversation.

  • MikeSeale
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 2 weeks ago #21956 by MikeSeale
Replied by MikeSeale on topic Rubin
I didn't do much yesterday but did manage to fix the fin to the fuselage and also get the rudder completed. The top of the fin is sandwich of 2 sheets of light balsa with a 1/32 ply filling. This allows me to sand it down to a taper and a) retain strength and b) allows me to sand each side equally down to the ply
Attachments:

Please Log in or Create an account to join the conversation.

  • MikeSeale
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 2 weeks ago #21957 by MikeSeale
Replied by MikeSeale on topic Rubin
BTW, I placed an order with Model Shop Leeds yesterday afternoon and it was delivered this morning.

Please Log in or Create an account to join the conversation.

  • MikeSeale
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 2 weeks ago #21958 by MikeSeale
Replied by MikeSeale on topic Rubin
Sub-fin added and sanded to shape
Attachments:

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.542 seconds

Latest Posts