Stearman build

  • kevinross
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 7 months ago - 4 years 7 months ago #22455 by kevinross
Replied by kevinross on topic Stearman build

MikeSeale wrote:

kevinross wrote: the pax plate is approx 1/8. with 1.7mm holes for 16swg piano wire.

Youve got to love this metric world we live in


Perhaps i should have quoted the paxolin is approx 3.27mm thick and the holes are drilled with No 51 !!
Last edit: 4 years 7 months ago by kevinross.

Please Log in or Create an account to join the conversation.

More
4 years 7 months ago #22458 by simondean
Replied by simondean on topic Stearman build
Excellent work, most time is spent thinking through a design and checking everything’s right before committing materials.
And a lot of patience

Please Log in or Create an account to join the conversation.

  • kevinross
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 7 months ago #22475 by kevinross
Replied by kevinross on topic Stearman build
Making a rudder tiller that doesn't distort is a problem on a Stearman due to its slope. The first pic is from the parts catalogue.

I fabricated this from two pieces go 0.5mm stainless which i formed concave,( eg see last pic ) then silver soldiered the edges to create hollow arms
Attachments:
The following user(s) said Thank You: 4Pedalsfly

Please Log in or Create an account to join the conversation.

More
4 years 7 months ago #22477 by Brian
Replied by Brian on topic Stearman build
I envy your patience Kevin, at least the rudder horns will be visible, seems a pity that so much of your engineering will be hidden.

Please Log in or Create an account to join the conversation.

More
4 years 7 months ago #22478 by Phil Ford
Replied by Phil Ford on topic Stearman build

Brian wrote: I envy your patience Kevin, at least the rudder horns will be visible, seems a pity that so much of your engineering will be hidden.

Yes, but Kevin will know it is excellent and works. ;) All this stainless and aircraft quality ally!

Please Log in or Create an account to join the conversation.

  • kevinross
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 7 months ago #22514 by kevinross
Replied by kevinross on topic Stearman build
Fin and rudder finally complete. Had to add a lot of reinforcement to support the revised tiller.
Attachments:
The following user(s) said Thank You: Phil Ford

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.446 seconds

Latest Posts