Stearman build

  • kevinross
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
3 years 11 months ago #22028 by kevinross
Stearman build was created by kevinross
Time to join the lockdown build project group.
I recently acquired a pre-started Flair Stearman kit (out of production for many years) The majority of wood parts were complete but much of the hardware missing so i will make more scale like parts. The fuselage was mostly built but my rework of the Cabane structure has taken many hours of planning and work.
Attachments:

Please Log in or Create an account to join the conversation.

  • kevinross
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
3 years 11 months ago #22029 by kevinross
Replied by kevinross on topic Stearman build
My plan is build the Cabane structure to look more like the full size by replacing the standard 1/4" x 3/4" rectangular section with reinforced and braced streamlined struts
Attachments:

Please Log in or Create an account to join the conversation.

  • kevinross
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
3 years 11 months ago #22030 by kevinross
Replied by kevinross on topic Stearman build
Made a start on the upper centre section with reworked mounts for the 30deg angled Cabane struts
Attachments:

Please Log in or Create an account to join the conversation.

More
3 years 11 months ago #22031 by MikeSeale
Replied by MikeSeale on topic Stearman build
Looking good, Kevin. Hopefully we'll see this take to the skies this summer.

Please Log in or Create an account to join the conversation.

More
3 years 11 months ago #22033 by JonTappin
Replied by JonTappin on topic Stearman build
That's looking nice Kevin, you do like a stearman don't you!

Please Log in or Create an account to join the conversation.

More
3 years 11 months ago #22034 by 4Pedalsfly
Replied by 4Pedalsfly on topic Stearman build
Hi Kevin - A lot of work to be done - look forward to following the build thread.

Colin

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.336 seconds