Stearman build

  • kevinross
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
3 years 10 months ago #22398 by kevinross
Replied by kevinross on topic Stearman build
Prepared all the parts for the 4 wing spar boxes and finished both lower units
Attachments:

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #22399 by JRI
Replied by JRI on topic Stearman build
Will you be putting lightening holes in the aluminium joiner Kevin?

Please Log in or Create an account to join the conversation.

  • kevinross
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
3 years 10 months ago #22400 by kevinross
Replied by kevinross on topic Stearman build

JRI wrote: Will you be putting lightening holes in the aluminium joiner Kevin?


Ive thought about it but this 89" Flair version is reputed to build at least 5 LBS lighter than a Nick Zirrolli 87" so i'll see what the finished weight is

Please Log in or Create an account to join the conversation.

  • kevinross
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
3 years 10 months ago #22405 by kevinross
Replied by kevinross on topic Stearman build
Last night i built the first of the upper wing spar boxes IAW the plan but found a major problem. The tapered furings created an offset causing a mismatch to the centre section. So I had to carefully cut out the spars and remake the box parts.

This time I cut a groove in one spar which allowed the alloy spar to exit centrally.
Attachments:

Please Log in or Create an account to join the conversation.

  • kevinross
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
3 years 10 months ago #22406 by kevinross
Replied by kevinross on topic Stearman build
spar box now aligns with centre section
Attachments:
The following user(s) said Thank You: 4Pedalsfly, Phil Ford, Brian

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #22408 by Phil Ford
Replied by Phil Ford on topic Stearman build
Finally getting progress underway.

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.301 seconds