DH VAMPIRE

More
9 years 10 months ago #5413 by kevinross
Replied by kevinross on topic DH VAMPIRE
Another impressive build Pete, I think you must be only half human because the other half is machine !!

Please Log in or Create an account to join the conversation.

  • flyingpete
  • Topic Author
  • Offline
  • Banned
  • Banned
More
9 years 10 months ago #5426 by flyingpete
Replied by flyingpete on topic DH VAMPIRE
Kevin,I think I had better spend a bit of time with Mrs C as I don't think she remembers what I look like ;)

Please Log in or Create an account to join the conversation.

More
9 years 10 months ago #5428 by JRI
Replied by JRI on topic DH VAMPIRE
Awesome job - is there a common spar for the wings or are they individually attached and braced to the fus'?

Please Log in or Create an account to join the conversation.

  • flyingpete
  • Topic Author
  • Offline
  • Banned
  • Banned
More
9 years 10 months ago #5431 by flyingpete
Replied by flyingpete on topic DH VAMPIRE
John, the outer panels are on tubes,the inner panels are glued to the fuselage structure with a 1/4 ply dihedral brace on the front and a 1/8 ply brace on the rear.Incase David decides to 3d the vampire I have gone belt and braces by adding extra 1/8 light ply shear webs around these joints and pinned the whole lot with1/8 dowels.

Please Log in or Create an account to join the conversation.

More
9 years 10 months ago - 9 years 10 months ago #5436 by Phil Ford
Replied by Phil Ford on topic DH VAMPIRE

flyingpete wrote: In case David decides to 3d the vampire I have gone belt and braces by adding extra 1/8 light ply shear webs around these joints and pinned the whole lot with1/8 dowels.


I do believe that is called "over built" Pete as kits go...... ;) Anyways, David only does 2D, but Jon on the other hand........ :whistle:
Last edit: 9 years 10 months ago by Phil Ford.

Please Log in or Create an account to join the conversation.

  • flyingpete
  • Topic Author
  • Offline
  • Banned
  • Banned
More
9 years 10 months ago #5437 by flyingpete
Replied by flyingpete on topic DH VAMPIRE

PhilF51 wrote:

flyingpete wrote: In case David decides to 3d the vampire I have gone belt and braces by adding extra 1/8 light ply shear webs around these joints and pinned the whole lot with1/8 dowels.


I do believe that is called "over built" Pete as kits go...... ;) Anyways, David only does 2D, but Jon on the other hand........ :whistle:

Phil,do you think Jon is planning on doing 100 mph snaps :woohoo:

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.315 seconds

Latest Posts

  • No posts to display.