Phase 6 Glider KIt

My wing is like David’s. One servo in centre. Easy peasy.

Chris, have took all the Bits out of the box. Wings veneered and cut out centrally for a mini servo. (Although they still supply the torque rod and nylon bearings for centre servo, although the central recess is longer there. Torque rod is now recommended to use for optional flaps. Fuselage sides are two piece still and CNC cut using liteply. Might follow what others have done that I read recently and that is make up one piece sides in birch ply using the original sides as a template. Fuselage formers are laser cut ply and no longer require balsa backing.

Dave Rogers wrote: My wing is like David’s. One servo in centre. Easy peasy.

Dave, I can't remember, was yours the fully symmetrical wing version?

Yes fully symmetrical. Also my wing does have 2 servos but both mounted one behind the other in the centre of the wing

Cheers Dave, yours flew well enough the other week, that's the one I would be tempted with.

Dave Rogers wrote: Yes fully symmetrical. Also my wing does have 2 servos but both mounted one behind the other in the centre of the wing

That must be tight fit. You have full length ailerons? I'll have to look at that. :huh: