Goldberg Super Chipmunk

  • Phil Ford
  • Topic Author
  • Offline
  • Administrator
  • Administrator
More
4 years 1 month ago - 4 years 1 month ago #21644 by Phil Ford
Goldberg Super Chipmunk was created by Phil Ford
Bought this Super Chipmunk 63 inch wingspan on Ebay at least 8 years ago and has been buried in the back of the hangar ever since. It was a Carl Goldberg kit before Goldberg made an ARF version. It was powered by a sweet 65 four stroke which I sold on. I was planning to give it something more lively and redo the covering which was faded to say the least. That's when lack of interest came up. Ruddy covered with Monokote (they should hang the guy who invented that). The top layer comes off leaving a ruddy mess of pigment and glue. Made a start on it and then gave up.

Wind forward to 2020 and held hostage indoors by bad weather. Took another look at it and another attempt to get a bit more Monokote off. I then made a servo tray and found some old pushrods for the rudder and elevator. Made up guide tubes from snake outers. I have a new fibre-glass cowl that came with it too fortunately. Last two days I have recovered it with Oracover (with colours I had in stock) because I am not spending to much money on it. Two new digital servos though. Will be looking for an 70 -80 size four stroke for it. Salisbury MFC have a Swapmeet in April so might find one there.

It is real struggle sometimes recovering. Much easier to cover individual components.

Images show progress so far
Attachments:
Last edit: 4 years 1 month ago by Phil Ford.

Please Log in or Create an account to join the conversation.

  • Visitor
  • Visitor
4 years 1 month ago - 4 years 1 month ago #21646 by
Replied by on topic Goldberg Super Chipmunk
Phil
I may be going to the Romsey swap meet on Sunday if you want me to look out for a motor.
Last edit: 4 years 1 month ago by .

Please Log in or Create an account to join the conversation.

  • Phil Ford
  • Topic Author
  • Offline
  • Administrator
  • Administrator
More
4 years 1 month ago #21647 by Phil Ford
Replied by Phil Ford on topic Goldberg Super Chipmunk
Ah Yes Simon! Forgot about that. ;) See you there.

Please Log in or Create an account to join the conversation.

More
4 years 1 month ago #21649 by JonTappin
Replied by JonTappin on topic Goldberg Super Chipmunk
Phil

There are a few 70-80 4 stroke motors from Stuart's estate that are still available, 2 x Saito and 2 x Lasers if that's any use to you.

Please Log in or Create an account to join the conversation.

  • Phil Ford
  • Topic Author
  • Offline
  • Administrator
  • Administrator
More
4 years 1 month ago #21651 by Phil Ford
Replied by Phil Ford on topic Goldberg Super Chipmunk
Thanks Jon. One of them might do the job. Where can I take a look at them to see if they will fit with out me hacking the cowl to bits.

Please Log in or Create an account to join the conversation.

  • Phil Ford
  • Topic Author
  • Offline
  • Administrator
  • Administrator
More
4 years 1 month ago #21652 by Phil Ford
Replied by Phil Ford on topic Goldberg Super Chipmunk

Phil Ford wrote: Ah Yes Simon! Forgot about that. ;) See you there.


Just realised it is in March not THIS Sunday! :S

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.499 seconds