BVM Mig.15

More
7 years 5 months ago #11082 by flyingpete
Replied by flyingpete on topic BVM Mig.15
Next up fin and rudder, the top of the rudder is glued permantly in position leaving the lower half to move.
Attachments:

Please Log in or Create an account to join the conversation.

More
7 years 5 months ago #11084 by Phil Ford
Replied by Phil Ford on topic BVM Mig.15
Your doing a grand job there Pete. I would be sh****ing myself cutting into a multi million dollar plane in case I made a cock up. :whistle:

Please Log in or Create an account to join the conversation.

More
7 years 5 months ago #11085 by flyingpete
Replied by flyingpete on topic BVM Mig.15
Rudders hinged with Robarts glued with 30min epoxy. 1/32 packers to set the correct gaps and taped in place while the glue goes off.
Attachments:

Please Log in or Create an account to join the conversation.

More
7 years 5 months ago - 7 years 5 months ago #11086 by flyingpete
Replied by flyingpete on topic BVM Mig.15
Next up, fitting the tail plane to the fin boss, carbon spar and anti rotation dowels control horn and servo arm cutouts.
Elevators are pre hinged by BVM
Attachments:
Last edit: 7 years 5 months ago by flyingpete.

Please Log in or Create an account to join the conversation.

More
7 years 5 months ago - 7 years 5 months ago #11087 by flyingpete
Replied by flyingpete on topic BVM Mig.15
Tail plane fitted
Attachments:
Last edit: 7 years 5 months ago by flyingpete.

Please Log in or Create an account to join the conversation.

More
7 years 5 months ago #11088 by Chris73
Replied by Chris73 on topic BVM Mig.15
Good to see you are taking it easy on your Christmas shutdown :silly:

Great work as usual Pete :cheer:

Please Log in or Create an account to join the conversation.

Moderators: DaveBright
Time to create page: 0.366 seconds

Latest Posts