Rubin

MikeSeale
Topic Author
Offline
Platinum Member

4 years 3 weeks ago #22000 by MikeSeale

Replied by MikeSeale on topic Rubin

And I decided to make just the belly pan removable and attached with magnets...and a dowel at the back.

Attachments:

The following user(s) said Thank You: 4Pedalsfly, Phil Ford, John Bannister, Brian

Please Log in or Create an account to join the conversation.

MikeSeale
Topic Author
Offline
Platinum Member

4 years 2 weeks ago #22007 by MikeSeale

Replied by MikeSeale on topic Rubin

My hay fever kicked in big time today and setting foot in the workshop set me off so very little done today. Instead I spent the time indoors with some photography.

Attachments:

The following user(s) said Thank You: Phil Ford, Brian

Please Log in or Create an account to join the conversation.

MikeSeale
Topic Author
Offline
Platinum Member

4 years 2 weeks ago #22020 by MikeSeale

Replied by MikeSeale on topic Rubin

Hay fever is under control today - just one sneeze so far!

I only managed a couple of small tasks yesterday. I added aileron servo trays to the wing and glued and sanded to lower front decking to match the top of the fuselage.

Attachments:

Please Log in or Create an account to join the conversation.

MikeSeale
Topic Author
Offline
Platinum Member

4 years 2 weeks ago #22022 by MikeSeale

Replied by MikeSeale on topic Rubin

Today it was time to make a cowl. I've never done this before so bear with me. Three blocks of Styrofoam are glued together and then cut to rough shape using a hot wire. A couple of hours of sanding and it looks like a cowl.

Attachments:

Please Log in or Create an account to join the conversation.

MikeSeale
Topic Author
Offline
Platinum Member

4 years 2 weeks ago #22023 by MikeSeale

Replied by MikeSeale on topic Rubin

The next step is to cover the cowl in packing tape and glass it. I'll probably then use the 'lost foam' technique, but might use the cowl as a plug for a mould. Here's the model at this stage looking a lot more like a Rubin.

Attachments: